CNCezPRO™ Software

Real-Time 3D Graphics Simulation for Computer Numerical Control



G02 CIRCULAR INTERPOLATION (CLOCKWISE)
N_ G02 X_ Z_ I_ K_ F_ (I and K specify the radius) or N_ G02 X_ Z_ R_ F_ (R specifies the radius)
Circular Interpolation is defined by the G02 command. It executes all circular or radial cuts in a clockwise motion. The G02 command requires an endpoint for the move, the radius, and a feedrate.
Example G02
% (PROGRAM START FLAG)
:1002
N05 G20 G40
N10 T0202
N15 M03
N20 G00 X1.75
N22 Z0.1 M08
N25 G01 Z-0.5 F0.012
N30 G00 X2
N35 Z0.1
N40 X1.4
N45 G01 Z-0.25
N50 G00 X2.1
N55 Z-1
N60 G01 X2
N65 G02 X0 Z0 I-1 K0
N70 G00 X2.1
N75 Z-1
N80 G01 X2
N85 G02 X2 Z-2 I0.5 K-0.5
N90 G00 X4 Z3 M09
N95 T0200 M05
N100 M30