CNCezPRO™ Software

Real-Time 3D Graphics Simulation for Computer Numerical Control



G03 CIRCULAR INTERPOLATION (COUNTER-CLOCKWISE)
N_ G03 X_ Z_ I_ K_ F_ (I and K specify the radius) or N_ G03 X_ Z_ R_ F_ (R specifies the radius)
The G03 command executes all radial cuts in a counterclockwise motion. It requires an endpoint for the move, then the radius, the distance from the startpoint to the centerpoint, and a feedrate.
Example G03
% (PROGRAM START FLAG)
:1003
N05 G20 G40
N10 T0202
N15 M03
N20 G00 X1.75
N22 Z0.1 M08
N25 G01 Z-0.5 F0.012
N30 G00 X2
N35 Z0.1
N40 X1.4
N45 G01 Z-0.25
N50 G00 X1.5
N55 Z0.1
N60 X0
N65 G01 Z0
N70 G03 X2 Z-1 I0 K-1
N75 G01 Z-2
N80 G03 X2 Z-1 I0.5 K0.5
N85 G00 X4 Z3 M09
N90 T0200 M05
N95 M30